Six selection rules for kitchen faucets

The faucets in the kitchen are often used. The faucet is small, but the quality cannot be low. Here are six rules for the selection of Kitchen Faucets:

Faucet Selection Rule 1: Water Saving

When selecting the faucet, ask if the speed of the water flow is maintained at about 8.3 liters/minute, the purpose of saving water can be achieved. In addition, some faucets have a honeycomb-shaped restrictor that not only allows the water to flow out of the foam, limits the flow rate, but also allows the user to feel the water flow softer and feel more fluid.

Faucet selection rule 2: durable

Whether the faucet is durable or not, the surface treatment process is very important. A good faucet is subjected to acidic high-temperature testing and is intact for more than 4 hours. In addition, due to the rational internal structure, the faucet is not prone to dripping and damage, and is still subject to hundreds of thousands of switches. Can be manipulated freely.

Faucet Selection Rule 3: Humanization

There is a pull-out Kitchen Faucet on the market, with columnar water outlet and jetted water, which can be easily switched on the top button of the shower. It is clean and convenient. It has a 1.5 meter long stainless steel hose that can be pulled out easily. Get to where you need it, make cleaning fun.

Faucet selection rule 4: easy to clean

The fumes in the kitchen are relatively large. The surface of the faucet is likely to lose its luster after repeated cleaning, and the discoloration and peeling of the coating may occur. Therefore, when purchasing a faucet, the warranty period must be known. It is understood that the faucet should not be less than 3 years in general. There is a kitchen faucet on the market that uses aerospace PVD technology, which can withstand brushing of steel wool and various cleaning agents without fading and abrasion.

Faucet Selection Rule 5: Environmental Protection

The lead content in the water is mainly caused by the water flushing the water channel. After achieving direct drinking water in the U.S., strict quality requirements for lead have been put forward for water quality, water pipes, and faucets. For example, the United States Delta has taps, its water pipeline is made of refined copper, the low-temperature welding process between the inlet pipe and the faucet body, the use of special welding materials, free of pollutants.

Faucet Selection Rule 6: Convenience

The design of the faucet must be simple and practical, to meet the needs of a variety of cleaning. The perfect cooperation between the faucet and the sink makes the cleaning more convenient and does not cause clogging of the food residue.

Links: The bathroom can also be paved with solid wood flooring

Sink fixture brand faucet switch stainless steel bathroom design